Melik

The Melik, also known as the king, is a timeless single action double action 9mm pistol. This 10rd pistol is accurate, reliable, and will go the distance. The safety and precision of this pistol makes it a winner for all scenarios. Finished with black melotine slide and barrel, anodized black frame.

Trigger Action
SA (single action) / DA (double action)

Safety Type
Slide-mounted combined safety and decocking lever.

Grip
Grips are made of Turkish Wood

Frame
Made of Aluminum

Compatibility with Beretta
Melik internal parts aren’t interchangeable.

Material used and Finish process 

For material used, Melik slide is forged 4140 steel. Barrel is 4140 Annealed Extruded Steel (heat treated, followed by crack inspection, then drilling, and finally machining).  For frame, we machine from 7075 Aluminum solid block.

For finish process, all slide and barrels are Melotine finish from Turkiye (in house). The aluminum is anodized in house. If your gun is Cerakoted or Ceramic Coating, we melonite first then cerakote for ultimal performance. 

Frequently asked questions on Melik

Melik vs. Beretta 92FS
Comparison of Two Firearms

Frame
The Melik's grip screws are set into a raised section of the frame, whereas the Beretta uses steel inserts. The Melik's screws are of a larger diameter, making it unlikely for wood or hard material grips to fit over them. Similarly, Beretta's wooden grips are incompatible with the Melik.
Melik diameter: .265”
Beretta diameter: .238”
While the grip screws can be swapped between the two, the grips themselves require adjustments and are not flush, depending on the manufacturer.
The magazine wells are similar, allowing magazines to fit both firearms. The Melik uses an ACT MAG Magazine.
The frame slide rails are nearly identical in width, with Melik at .840” and Beretta at .845”. However, the rail height differs, with Melik at .169” and Beretta at .175”.
The Beretta slide can be mounted on the Melik, but the Melik slide cannot be mounted on the Beretta frame due to the rail height difference.
Barrel cuts on the frame are compatible, allowing for barrel interchangeability.
The takedown lever and magazine release are interchangeable.
The trigger pin, trigger, and spring can be swapped.
The transfer bar is compatible.
Other frame components are similar but require fitting.

Slide
The firing pin blocks differ, leading to distinct slide cuts. The Melik has an oval top, while the Beretta is flat on one side.
Barrels and locking blocks are custom-fitted to the slide on both firearms.
Other slide components are similar but require fitting.

I don't see my firearm, item number, UPC, or color listed for Melik, where is it? On our website, we only list the type of firearms, as each type might include up to 10 different items. Variations exist due to different color exclusives and varying magazine capacities to comply with state gun laws. Below are all the item numbers, UPCs, and special information: If an item number starts with a number followed by an "L", it indicates a magazine limitation from the standard item. If an item number ends in "US", it means the firearm was Made in the United States. If an item number ends in "TR", it signifies the firearm was made in Türkiye.